Sterizen UVM+ runs 253.7 nm germicidal UV-C alongside ultrasonic dry mist, so airborne and surface contamination are treated in the same cycle — with no residue, no equipment covering and no mopping afterwards.
The COVID-19 pandemic sharpened global attention on airborne risk in healthcare, and aerosol-generating procedures — dentistry in particular — came under scrutiny as transmission pathways were re-evaluated.
Bioaerosols produced during routine care remain suspended in enclosed spaces before settling onto surfaces. Treating one and not the other leaves a gap.
Modern infection control has to address airborne and surface contamination together, through structured and validated approaches. That is the problem UVM+ was built around.
Two mechanisms in one automated unit. Germicidal UV-C at 253.7 nm inactivates organisms in the air and on exposed surfaces, while ultrasonic dry mist carries disinfectant into the places light cannot reach.
UVM+ · UV-C + dry mistUV-C light paired with ultrasonic dry mist for complete air and surface disinfection with zero residue.
An ultrafine particle size below 5 microns leaves nothing behind, so electronics in the room stay safe and uncovered.
Up to 70% lower disinfectant cost than foggers and fumigators, without compromising performance or effectiveness.
Room turnaround is what decides whether a disinfection protocol survives contact with a busy theatre list. UVM+ is specified by area and cycle time so scheduling is predictable.
Germicidal UV-C is harmful to skin and eyes. The room must be unoccupied for the duration of the cycle, and the safety sensors are a backstop rather than a substitute for that.
| Feature | UVM+ | Fumigators / foggers |
|---|---|---|
| Ultraviolet-C light | 253.7 nm germicidal UV-C | Absent |
| Particle size | Under 5 microns — residue free | 10–50 microns, forms residue |
| Disinfectant consumption | Under 350 ml per hour | 1–3 litres per hour |
| Turnaround time, 500 sq ft | 30 minutes | Over 4 hours |
| Impact to electronics | Very safe — no need to cover equipment | Residue causes damage, equipment must be covered |
| Post disinfection | None | Manual mopping |
Sterizen technology is used by healthcare institutions and proven in real-world settings, with collaborations across research institutions to hold quality and validation standards. Avinya Infinity Solutions was recognised with the National Startup Award 2023.
UVM+ runs on standard hospital disinfectant chemistry rather than a proprietary consumable, which is a large part of why the running cost lands where it does.
Concentration should be matched to the setting. Confirm the correct chemistry and dilution for your application with us before first use.
Built for environments where contamination risk is structurally high — dental setups, operation theatres, ICUs, wards, diagnostic laboratories and clean rooms.
Testing carried out by independent organisations across microbiological efficacy, air sampling, electrical safety and durability.
| S.No | Organization | Test |
|---|---|---|
| 01 | Dane Diagnostic | ISO 14698-1:2003 |
| 02 | Rajiv Gandhi Cooperative Hospital | ISO 14698-1/2 |
| 03 | Shrient Analytical and Research Labs Pvt Ltd | NIOSH-600, NIOSH 7082, ASTM D 2914 |
| 04 | Greenlink Analytical and Research Lab Pvt Ltd | ISO 11737-1:2008 |
| 05 | ITI Limited | Electrical safety testing |
| 06 | SWEN Konformity LLP | Environment / durability testing |
Sterizen is an infection control brand developed for environments where contamination risk is structurally high: dental setups, operation theatres, ICUs, wards, diagnostic laboratories and clean rooms.
The solutions are designed to strengthen environmental disinfection protocols through validated real-world clinical testing, and engineered to fit existing hospital workflows while improving compliance, microbial reduction and operational efficiency.
Avinya Infinity Solutions was recognised with the National Startup Award 2023.
“To elevate the standard of patient safety by transforming infection control practices and enabling safer care environments across healthcare and beyond.”
“To design and deploy integrated environmental disinfection technologies that improve air and surface safety, backed by real-world testing and independent validations.”
NVAK Biotech Instruments supplies, installs and supports Sterizen UVM+ in Telangana and Andhra Pradesh.
Floor area, ceiling height, equipment in the room and how often you need to turn it around — that is enough for us to specify the unit and the disinfectant chemistry.